CREIA - California Real Estate Inspection Association

Page « 1 | 2 | 3 | 4 »

InspectTest

This series of columns is designed to familiarize CREIA members with “The Glossary Project” which is “Standardized Terminology for the Professional Real Estate Inspector”. This is a must have for all inspectors and is especially helpful in preparing the candidate for the CREIA CCI test as most of the terms in the test are defined in The Glossary Project. It is available from shop.CREIA.org.

1. Devices, equipment or materials with a label, seal, symbol or other identifying mark of a testing laboratory, inspection agency or organization concerned with product evaluation that maintains periodic inspections of the production of the item and attests to compliance with a specific standard is referred to as being ___________________.
2. ___________ __________ is an area, room or space normally occupied and being heated or cooled for human habitation by any equipment.
3. An electrical circuit with two or more ungrounded conductors which share grounded conductors is a ________-________ ___________ _________.
4. ____________ _______________ is the emptying of a plumbing fixture in a reasonable amount of time, without overflow when another fixture is drained simultaneously.
5. A nonstructural facing of brick, concrete, stone, tile, metal, plastic or other similar material attached to a backing for the purpose of ornamentation, protection or insulation is known as ________________________.
6. The ______________ ______________ is a device or devices by which the electrical system can be disconnected from its source of supply.
7. A ___________ __________ is a device for lifting sewage by entraining it on a high-velocity jet stream, air, or water.
8. The final thin layer in a three-coat system of hand finished plaster or stucco is the ____________ _____________.
9. ___________ ___________ is the formed metal secured to a wall, curb or chimney to cover the upper edge of a base flashing for weatherproofing, typically at roofs and balconies.
10. A chemical applied to wood to protect it from insects, dry rot, and moisture is a ___________________ ___________________.

Click here for the answers (Sorry members only)

Off The Net

Pool & Spa Safety... Don't read at your own peril.
Click here (Sorry T.I.E. Members only)

CREIA Leadership and BOD Meetings in San Diego, CA, July 2009

« 1 | 2 | 3 | 4 »

Page 4

EVENTS &
EDUCATION

Congratulations!

New Candidates

Paula Martin
Lane Aebi
Rick Dehlinger
Stephen Miller
Paul Stream
David Davis
Gary Gramling
Mike Grafton

New CCIs

Brian Dwight

Page « 1 | 2 | 3 | 4 »

InspectTest

This series of columns is designed to familiarize CREIA members with “The Glossary Project” which is “Standardized Terminology for the Professional Real Estate Inspector”. This is a must have for all inspectors and is especially helpful in preparing the candidate for the CREIA CCI test as most of the terms in the test are defined in The Glossary Project. It is available from shop.CREIA.org.

1. Devices, equipment or materials with a label, seal, symbol or other identifying mark of a testing laboratory, inspection agency or organization concerned with product evaluation that maintains periodic inspections of the production of the item and attests to compliance with a specific standard is referred to as being ___________________.
2. ___________ __________ is an area, room or space normally occupied and being heated or cooled for human habitation by any equipment.
3. An electrical circuit with two or more ungrounded conductors which share grounded conductors is a ________-________ ___________ _________.
4. ____________ _______________ is the emptying of a plumbing fixture in a reasonable amount of time, without overflow when another fixture is drained simultaneously.
5. A nonstructural facing of brick, concrete, stone, tile, metal, plastic or other similar material attached to a backing for the purpose of ornamentation, protection or insulation is known as ________________________.
6. The ______________ ______________ is a device or devices by which the electrical system can be disconnected from its source of supply.
7. A ___________ __________ is a device for lifting sewage by entraining it on a high-velocity jet stream, air, or water.
8. The final thin layer in a three-coat system of hand finished plaster or stucco is the ____________ _____________.
9. ___________ ___________ is the formed metal secured to a wall, curb or chimney to cover the upper edge of a base flashing for weatherproofing, typically at roofs and balconies.
10. A chemical applied to wood to protect it from insects, dry rot, and moisture is a ___________________ ___________________.

Click here for the answers (Sorry members only)

Off The Net

Pool & Spa Safety... Don't read at your own peril.
Click here (Sorry T.I.E. Members only)

CREIA Leadership and BOD Meetings in San Diego, CA, July 2009

« 1 | 2 | 3 | 4 »

Page 4

EVENTS &
EDUCATION

Congratulations!

New Candidates

Paula Martin
Lane Aebi
Rick Dehlinger
Stephen Miller
Paul Stream
David Davis
Gary Gramling
Mike Grafton

New CCIs

Brian Dwight