CREIA - California Real Estate Inspection Association

You are here: Home

January 2009 Inspector eNews - Page 2

E-mail Print PDF
Article Index
January 2009 Inspector eNews
Page 2
Page 3
All Pages
CREIA Inspector Journal
January 2009 | Archives

Back to front page »

Seismic Gas Shut-off Valves

Spoiler alert. The following information exceeds CREIA’s Standards of Practice. Stop reading this now unless you wish to offer your client more than just a minimal home inspection. CREIA members are not required to determine “compliance with manufacturers’ installation guidelines or specifications, building codes…”

Siesmic Gas Shut-Off ValveRegarding my plumbing experience, size does matter. 1 of 10 seismic gas shut-off valves (herein referred to as a SGSV) is incorrectly installed. These valves are too small or installed on the wrong side of the gas meter. These SGSVs should be the same size or larger than the building stub size. In other words, a ¾-inch valve may not serve a 1½-inch gas line. Sensibly, every valve manufacturer makes more than one size valve because one size does not fit all. SGSVs are mechanical devices mounted near the gas meter that are designed to automatically shut off the flow of gas during a significant seismic event.

The Southern California Gas Company states 14,062 natural gas leaks were reported in customer facilities after the 1994 Northridge earthquake. Like ground fault circuit interrupters, a SGSV could be a thoughtful safety upgrade if not already required by the local building authority.

The mandatory installation of these valves could be triggered by transfer of property, new construction and certain remodeling. SGSV valves are already required by a few insurance companies and communities like Contra Costa County, Los Angeles, Alameda County, West Hollywood and Marin County.

Securing the SGSV to the structure with a brace is a requirement of the installation and will help prevent false or nuisance activation. Little Firefighter states their valve “shuts off your home or business natural gas supply in the event of a 5.4 or greater earthquake.” Los Angeles requires approved seismic gas shut-off valves to have a minimum 30 year warranty.

SGSV LocationDon’t rely on the building code to determine valve sizing. The plumbing code mandates pipe size only. Some locales will require a gas valve sized to the house line rather than the gas meter line. Documented ordinances like Los Angeles and the valve manufacturer’s installation instructions are your only proof of non compliance if you need to back up your suggestion for repairs.

Typically, only the blue box- type SGSV’s were allowed on the utility side of the gas meter and these valves were installed by the Gas Company. Southern California Gas Company’s parent, Pacific Enterprises, created a subsidiary called Energy Services (PEES) that has heavily marketed its SGSVs since September 1996, when the Public Utilities Commission granted the utility permission to install Los Angeles-approved SGSV’s on its side of the meter. SGE Blue Box SGSV ValveThese valves are no longer installed by the Southern California Gas Company (on or about 2/13/2002) because of accusations of unfair competition, burdensome self inspections/maintenance, and increasing liability for the Gas Company.

Weeks ago, I found a newer gas line that was not protected from seismic activity. This gas line to the new pool heater was installed upstream from an existing SGSV and not at all protected from seismic activity. Look at these valves closer on the next home inspection. CREIA is all about continuing education.

Submitted by: Joe Nernberg, CCI


Click here to learn about OREP Home Inspector E&O             Insusrance


Off The Net (Members Only)

Click here - 20 minutes into the Home Inspection

Click here - Stucco: Soffit weep screed system


California Ranks First on 2008 Energy Efficiency Scorecard

The American Council for an Energy-Efficient Economy (ACEEE) recently released the 2008 energy efficiency scorecard with California once again topping the list, outranking all other 49 states and the District of Columbia. The scorecard ranks each state based on its adoption and implementation of energy efficiency policies and programs, with the goal of encouraging states to raise the bar in efficiency commitments. It also emphasizes the importance of energy efficiency as a reliable, cost-effective and speedy way to actually reduce energy consumption and combat rising energy demand.

The survey evaluates states based on eight separate measures including transportation, building codes, appliance standards, and public and utility benefits. California scored first on the list in nearly all categories, and beat out Connecticut (number 3) and Oregon (number 2) for first place in the all-around total score.

Other states fell short, with North Dakota and Alabama scoring a meager one and a-half points out of fifty and Wyoming scoring zero. Fortunately, in addition to providing a benchmark, the scorecard serves as a roadmap to those states attempting to improve. Indeed, a number of states have improved their scores since the 2007 ranking, including Idaho, Maryland, and Ohio which were named the ‘most improved’ states this year.


Page 2



EVENTS &
EDUCATION

Click here to go to the CREIA Meeting and Events Calendar


Congratulations!

New Candidates

John O'Green
Tirso De Ubago
Robert Waysack
James Chung
Andres Garcia
David Erie
Tom Fasold
John Lewis
Scott Jemm

New CCIs

Brad Carter
Ridwanto Tirtatunggal
Steve Roseberry
Ryan Cooper


 

CREIA 2009 AZ Conference Info Package

All domestic non-members pay $25 per subscription year (12 e-issues).


 
Website Hosted by Home Inspector Pro